The 9822 Standard North American Kegger & Refrigerator Conversions Kit is
Just $116.66 US.
See Refrigerator Installation Instructions. |
Shown here with black plastic drip tray. |
* Very Popular * The Standard kit is another of our a very popular refrigerator draught beer conversion kits comes complete with everything you need to start dispensing fresh draft beer from a refrigerator or freezer except for the beer, CO2 cylinder and freezer controller sold separately. From real brewery approved beer line to the finest professional couplers and faucets, our standard kits will outlast all other kits available on the market because we sell the same equipment in our kits as we sell to bars. We use only 100% made for commercial use components from America manufacturers. No cheap made for home use parts in our kits.
Standard & Deluxe Fridge Installation Instructions.
Order your standard fridge conversion kit by the part number in the table below by the keg connector and application required. The shipping weight is approximately 10 pounds. All prices are in U.S. Dollars.
|
| Select Kit by the Keg Coupler for beer keg you wish to tap. |
Kit
P/N |
Price
U.S. $ |
| Standard Kit w/System "D" US lever coupler. For most North & South American Beers such as Budweiser, Miller, Coors, Molson, Labats, Corona etc. |
9822 |
$116.66 |
| Standard Kit w/Perlick LowBoy System "D" US coupler for most North American beers in tight spaces. This is the lowest profile coupler anywhere with less than 0.125" protruding above the keg rim. |
9823 |
$147.92 |
| Standard Kit w/Twin Probe tap |
9824 |
$137.05 |
| Standard Kit with a European Sankey System "S" coupler |
9826 |
$124.16 |
| Standard Kit w/Grundy System "G" coupler. For Anchor Steam, Bass, Caffreys, Watney etc. |
9827 |
$147.92 |
| Standard Kit w/German Flat Slider System "A" coupler. For Warsteiner, Spaten, Paulaner etc. |
9828 |
$153.25 |
Standard Kit w/U.E.C. System "U" coupler
With CO2 regulator and standard beer faucet.
To properly serve stouts you will need a 9830 or 9831 shown below. |
9829 |
$147.92 |
| Standard S/S Stout Kit w/U.E.C. System "U" coupler, Stout gas regulator, stout faucet and a long white pub handle. |
9831 |
$251.50 |
| Standard Brass Stout Kit w/U.E.C. System "U" coupler, Stout gas regulator, stout faucet and a long white pub handle. |
9830 |
$258.08 |
Top of page.
|
Kegger Conversion Kit Options
- Convienience of obtaining your CO2 Cylinder locally or buying a New 5 pound aluminum (not a cheap heavy iron one) cylinder p/n 7914 for $59.95 US when purchased with the Standard kit. One cylinder per kit limit. Not included in kit.
- If you are tight on space a chest freezer may be the answer and we have a Freezer Thermostat to control any fridge or freezer from 20°F to 80°F. p/n
9025. It will keep any home freezer at a perfect 38° F.
- When planning a remote location from the beer cooler order our home glycol
DIY plans for just $11.95.
- Here is a look at the installation plans for installing your real draft conversion kit:
Refrigerator Inbstallation plans.
Please note:
- Drip trays may change with availability.
- If you are in a location where you cannot obtain a carbon dioxide cylinder locally, which we recommend you do, you can get a new aluminum 5# CO2 cylinder from us. When purchasing the cylinder with your kit use the special part number 7914 which is $59.95. This is a special price only available with a kit purchase.
The parts listed below are common to all standard conversion kits; the keg connector is included with the kits but the part number is not given here since the part number selection table above lists that component. Do not order kits by individual part numbers below. Use the kit part numbers above when ordering.
The CO2 beer and ale standard refrigerator conversion kit has the following components:
- One 80XX series commercial keg coupler
- One 6311 standard single gauge beer CO2 regulator
- One 8500 chrome plated brass commercial bar faucet
- One nipple & shank assembly
- One 8541 black plastic faucet handle
- Five feet of clear 7010 Brewery Approved 3/16 I.D. beer line
- Four feet of 7080 5/16 I.D. red pressure line
- Two 7332 worm drive hose clamps for beer line
- Two 7333 worm drive hose clamps for gas line
- One 5009 4 ounce B*L*C* or No-Rinse Line Cleaner
- One plastic hanging drip tray
- Two Sheetmetal Screws for drip tray
- One White Plastic CO2 Stem Washer
- Complete installation & usage instructions
The Beer Gas stout Option contains:
- One standard two gauge beer gas regulator in place of CO2 regulator
- One nitrogen stout and ale faucet in place of standard faucet
- One tall Irish pub faucet handle in place of black plastic knob
Top of page.
|
|
|
